Aquarium Water | Reverse Osmosis | RODI Water | ReefKeeper Water | Add a Membrane to your System-Hardware only Aquarium Water Guru

our price: $24.95

Quantity:

Sku: ADDMEMBHARDW

Manufacturer: AWI

Mfg. ID: ADDMEMBHARDW

All RO Systems are designed to have about a 3 to 1 ratio of waste water to pure water made. You can reduce that ratio down to about 2 to 1 by adding this kit.

Accessories

	FilmTec Membrane 50 GPD The FilmTec 50 gpd membrane TW30-1812-50 fits most all RO systems. It is a TFC thin film composite mambrane with a 98% rejection rate. more details $39.95 Quantity		FilmTec Membrane 75 GPD The FilmTec 75 gpd membrane TW30-1812-75 fits most all RO systems. It is a TFC thin film composite mambrane with a 98% rejection rate. more details $39.95 Quantity
	FilmTec Membrane 100GPD The FilmTec 100 gpd membrane TW30-1812-100 fits most all RO systems. It is a TFC thin film composite mambrane with a 90% rejection rate. more details $39.95 Quantity		150GPD Membrane This 150 gpd membrane fits most all RO systems. It is a thin film composite mambrane with a 95% rejection rate. This membrane is high output with slightly lower rejection. more details $44.95 Quantity

Specifications

All RO Systems are designed to have about a 3 to 1 ratio of waste water to pure water made. That waste water ratio is necessary in the process to clean the membrane off and keep it from getting clogged up. You can reduce the waste water down IF you want to reduce the life of the membrane. In fact you can make water with a RO membrane and not have ANY waste water, but it will clog the membrane quickly and it will be ruined. However you can reduce the waste water by about 25% by adding a second membrane to the system. Basically you use the waste water from the first membrane housing and feed into the second membrane housing which works if you have sufficient water pressure to the unit. We have many customers who do do this and it can be added to any of our systems.

Complete hardware kit for adding a second membrane to your existing Kent, Spectrapure or Typhoon. 1) standard membrane housing 1)flow restrictor 1) set of clips 2) 1/8 x 1/4 male elbows 1) 1/8 x 1/4 male elbow check valve product port 3) Y's to split the filtered water in line, to re-join the pure water output lines and to join the waste water lines into one. The membrane is NOT included with this kit.

In the two pictures shown the first is of the membrane added by splitting the incoming water ... The second picture of is of the new membrane added by tapping into the drain line of the first membrane. You should have 60 PSI or more to get the best benefit out of this added membrane. You may need to add a booster pump to your unit

Customer Reviews

This item has not yet been reviewed. Click Here to be the first